No Products in the Cart
What do they say about ACMER P1 10w？
Safety Protective Mechanisms
Drag Chain Cable Carrier
Make wires organizing much easier
To The Utmost
With an industry-leadingstructural design and equippedwith all-steel wheels and shafts,
P1 ensures the most accuratemovement.
Only take 3 steps to adjust
the focus in 5 seconds.
1. Pull down the focus lever.
2. Lower the laser module to make the focus lever touch the material surface.
3. Recover the focus lever.
Laser Module Focusing Controller
The rotary sliding table and fixed
focus knife can precisely
control the focal length adjustment
of the laser module to make the
engraving image finer.
Compressed Spot Technology
Advanced LD+FAC+C-lens technology enables the spot narrow down to 0.06mm,
and get much cleaner, thinner, smoother, deeper cuts.
High Density 10W
Laser Beam Shaping Technology
The 10W high power laser module, with a compression spot of 0.08mm, effortlessly
cuts through 20mm light wood, resulting in a smooth cuttiung surface without any edges collapsing.
This laser engraver machine does what I wanted it to do. Light wight to move anywhere and it is a true 10 watt laser. I had to see it to believe it. Also, does wonderful projects and very good on the quality. Easy... install the driver and Connect to software laserburn... Overall very good product a bunch applications. Should came with laserburn license for windows which I purchase... and thinking large I did order the enclose for expanding the frame of the laser.
I find this laser engrave a great step up from others lasers models. Assembly went quickly and all parts fit together smoothly. It can engrave faster and cut through thicker wood. It engraves well on metal as well as on wood. I have also used LaserGRBL before with my laser engravers, and of course, this Laser engraver Acmer P1 works well with LaserGRBL. I have put together a number of these laser engraver kits before, so I was able to get this one running in under 30 minutes. Overall, this is a great laser engraver that will open up new creative possibilities.
ACMER I must admit. the whole engraver is very well made in terms of material and manufacturing quality. The thing to improve is user manual, ease of initial setting for beginer, user and firmware support. The youtube videos are very good, but there are still some shortcommings. But i am sure you will get there. Best wishes from Slovakia.