No Products in the Cart
ACMER P1 Instruction Manual
ACMER P1 Lightburn User Manual
ACMER P1 LaserGRBL User Manual
ACMER P1 APP Operation Manual
ACMER P1 Motherboard Firmware Refresh
WIFI Mode
SSID: ACMER-P1-XXXXX
Password: 12345678
List of compatible software with ACMER P1
Tips: MKS TOOL is a tool that allows you to quickly modify the display UI and configuration files using a graphical interface
ACMER_P1_Firmware_V1.1.1_20240131
This firmware is compatible with ACMER P1 10W and ACMER P1 Pro 20W.
Upgrading the firmware may bring the following benefits: fixing vulnerabilities and errors, improving performance and compatibility.
Please update as needed.
The most common question in forums, especially on Facebook, is "What settings do I need for my project?" However, it's important to note that only you can answer that question. Each person has unique requirements and expectations for their desired result—whether it's brighter or darker. Additionally, every material and laser machine varies, even within the same batch. It's not uncommon to find discrepancies in performance, where one piece of plywood may work perfectly while another from the same package doesn't. These variations occur due to the nature of natural materials and differences in processing. Therefore, there are no universal settings that guarantee consistent results.
The speed at which the laser moves affects its performance. The more concentrated the power is on a point, the more material gets burned. This depends on the energy used per unit of time and area. When the laser moves faster, less energy is distributed over the same area per unit of time, resulting in proportional settings. For example, achieving 80% performance at 1000 mm/min should give a similar result as 40% performance at 500 mm/min. However, this guideline is not entirely accurate due to non-linear material reactions to energy.
When increasing speed reaches its limit, additional power won't compensate for it. In such cases, increasing the number of passes is necessary. This means the laser will go over each spot multiple times, resulting in deeper cuts or engravings.
ACMER P2 Instruction Manual
ACMER P2 Lightburn User Manual
ACMER P2 LaserGRBL User Manual
ACMER P2 FAQ
ACMER P2 Firmware Update Intructions
WIFI Mode
SSID: ACMER-P2-XXXXX
Password: 12345678
List of compatible software with ACMER P2
Tips: MKS TOOL is a tool that allows you to quickly modify the display UI and configuration files using a graphical interface
ACMER P2 Firmware V1.1_20230317
This firmware is compatible with ACMER P1 10W and ACMER P1 Pro 20W.
Upgrading the firmware may bring the following benefits: fixing vulnerabilities and errors, improving performance and compatibility.
Please update as needed.
The most common question in forums, especially on Facebook, is "What settings do I need for my project?" However, it's important to note that only you can answer that question. Each person has unique requirements and expectations for their desired result—whether it's brighter or darker. Additionally, every material and laser machine varies, even within the same batch. It's not uncommon to find discrepancies in performance, where one piece of plywood may work perfectly while another from the same package doesn't. These variations occur due to the nature of natural materials and differences in processing. Therefore, there are no universal settings that guarantee consistent results.
The speed at which the laser moves affects its performance. The more concentrated the power is on a point, the more material gets burned. This depends on the energy used per unit of time and area. When the laser moves faster, less energy is distributed over the same area per unit of time, resulting in proportional settings. For example, achieving 80% performance at 1000 mm/min should give a similar result as 40% performance at 500 mm/min. However, this guideline is not entirely accurate due to non-linear material reactions to energy.
When increasing speed reaches its limit, additional power won't compensate for it. In such cases, increasing the number of passes is necessary. This means the laser will go over each spot multiple times, resulting in deeper cuts or engravings.
ACMER P1 S Pro Instruction Manual
ACMER P1 S Pro Lightburn User Manual
ACMER P1 S Pro LaserGRBL User Manual
ACMER P1 S Pro FAQ
ACMER P1 S Pro Firmware Update Intructions
WIFI Mode
SSID: ACMER-P1-XXXXX
Password: 12345678
List of compatible software with ACMER P1 S Pro
Tips: MKS TOOL is a tool that allows you to quickly modify the display UI and configuration files using a graphical interface
ACMER_P1_SPRO_Firmware_V1.0_20231109
This firmware is compatible with ACMER P1 10W and ACMER P1 Pro 20W.
Upgrading the firmware may bring the following benefits: fixing vulnerabilities and errors, improving performance and compatibility.
Please update as needed.